Free Cubase macros

Browse every item in the library. Use search and filters on the main Vault page for a faster interactive view.

• A/B Monitor: Switch to Speaker Set 2
• A/B Speaker Compare: Set 1 then Set 2
• Abrir Conexiones VST
• Abrir Configuracin De Estudio
• Abrir Sample Editor En Ventana
• Activate and Start Arranger Chain
• Activate Arranger Mode
• Activate Arranger Mode
• Activate Color Tool
• Activate Color Tool
• Activate Comp Tool
• Activate Comp Tool
• Activate Delete/Erase Tool
• Activate DeleteErase Tool
• Activate Dim and Reference Level
• Activate Draw Tool
• Activate Draw Tool
• Activate Glue Tool
• Activate Glue Tool
• Activate Headphone Monitor
• Activate Marker Track
• Activate MIDI Step Input
• Activate Mute Tool
• Activate Mute Tool
• Activate Phones and Enable Click
• Activate Phones Output
• Activate Phones Output in Control Room
• Activate Q-Link and Expand Inserts View
• Activate Q-Link and Expand Sends Rack
• Activate Range Selection Tool
• Activate Range Selection Tool
• Activate Reference Level & Switch to Speaker Set 2
• Activate Select Tool
• Activate Select Tool
• Activate Speaker Set 1
• Activate Speaker Set 2
• Activate Split Tool
• Activate Split Tool
• Activate Studio 1 Cue
• Activate Studio 1 Cue Mix
• Activate Studio 1 Monitor Output
• Activate Talkback
• Activate Zoom Tool
• Activate Zoom Tool
• Add Audio Track and Marker Track
• Add Audio Track And Marker Track
• Add Audio Track and Record Enable
• Add Audio Track and Rename
• Add Audio Track and Rename It
• Add Audio Track from Preset
• Add Audio Track, Rename, and Record-Enable
• Add Chord Event to Track and Make Chords
• Add Chord Tensions and Advance to Next Voicing
• Add Chord Tensions and Record
• Add Chord Track
• Add Cycle Marker
• Add DOP Process and Adjust Fades to Range
• Add Drum Track and Open Drum Editor
• Add Folder Track
• Add Folder Track and Group Channel
• Add Folder Track and Group Channel for Stem Routing
• Add Folder Track and Group Selected Events
• Add Folder Track and Group Selected Tracks
• Add Folder Track and Rename
• Add FX Channel and Expand Inserts
• Add FX Channel and Expand Inserts in Mixer
• Add FX Channel and Expand Sends
• Add FX Channel and Expand Sends View
• Add FX Channel and Open Insert Slot 1
• Add FX Channel and Show Sends Rack
• Add FX Channel Track
• Add FX Channel, Show Sends and Inserts
• Add Group Channel and Expand Routing View
• Add Group Channel and Expand Sends
• Add Group Channel and Link Selected Channels
• Add Group Channel and Open Inspector Routing
• Add Group Channel and Rename
• Add Group Channel and Restore Full Mixer View
• Add Group Channel and Show Routing
• Add Group Channel and Show Routing in Mixer
• Add Group Channel and Show Routing Rack
• Add Group Channel and Show Selected in Mixer
• Add Group Channel Track
• Add Group Channel, Expand Sends and Routing
• Add Group Channel, Mute It, and Inspect Routing
• Add Instrument Track and Enable Record
• Add Instrument Track and Open Key Editor
• Add Instrument Track and Open VST Editor
• Add Instrument Track, Rename, and Open VST Editor
• Add Layout and Switch to It
• Add Marker Track
• Add Marker Track and Activate
• Add MIDI Chord to Track and Apply Drop 2 Voicing
• Add MIDI Selection to Chord Track
• Add MIDI Track and Open Key Editor
• Add MIDI Track and Rename
• Add Mono Audio Track and Record-Enable
• Add Mono Audio Track and Rename
• Add More Tensions and Advance Voicing
• Add New Audio Track
• Add New Instrument Track
• Add New Layout and Lock It
• Add New MIDI Track
• Add Plug-in via DOP and Apply
• Add Position Marker
• Add Sampler Track and Expand Inserts
• Add Sampler Track and Rename
• Add Sampler Track and Rename It
• Add Selected Events to Chord Track
• Add Selected MIDI to Chord Track
• Add Tempo Track
• Add Tensions and Advance Chord Pad Voicing
• Add Track from Preset and Show Inserts
• Add Track from Preset and Show Routing
• Add Track from Track Preset
• Add VCA Fader and Expand VCA Rack
• Add VCA Fader and Expand VCA View
• Add VCA Fader and Link Selected Channels
• Add VCA Fader and Show VCA Rack
• Add VCA Fader Track
• Adjust Fades to Range and Crossfade
• Adjust Fades to Range for Comp
• Adjust Fades to Range, Then Bounce
• Align Audio
• Alinear Audio
• AñAdir Pista De Audio Y Pista De Marcadores
• Aplicar Ganancia Al Audio Seleccionado
• Apply Crossfade Between Events
• Apply Crossfade Between Events
• Apply Crossfade to Comp Edit Points
• Apply Direct Offline Processing
• Apply Drop 2 Voicing and Add to Chord Track
• Apply Drop 2 Voicing and Advance Voicing
• Apply Drop 2 Voicing and Match Chord Track
• Apply Drop 2+4 Voicing and Convert to MIDI
• Apply Fade In and Out, Bounce, Then Create Sampler Track
• Apply Fade In to Audio Event
• Apply Fade In, Fade Out and Bounce
• Apply Fade Out to Audio Event
• Apply Fades and Crossfade Overlapping Events
• Apply Gain to Selected Audio
• Apply Gain To Selected Audio
• Apply Legato to MIDI Notes
• Apply Legato To MIDI Notes
• Apply MIDI Legato
• Apply Standard Fade In & Commit DOP
• Apply Standard Fade In and Fade Out
• Apply Standard Fade In and Out
• Apply Standard Fade In And Out
• Apply Standard Fade Out & Commit DOP
• Apply Standard Fades and Adjust to Range
• Apply Standard Fades then Create Sampler Track
• Arm All Audio and Record
• Arm All Audio and Start Playback
• Arm All Audio Tracks and Enable Click
• Arm All Audio Tracks and Start Recording
• Arm All Audio Tracks for Monitoring
• Arm All Audio Tracks for Record
• Arm All Audio Tracks For Record
• Arm Read and Write on Selected Tracks
• Arm Record and Start Recording
• Arm Record And Start Recording
• Arm Track and Enable Monitor
• Armar Todas Las Pistas De Audio Para Grabar
• Arranger Go To First Chain Step
• Arranger Next Chain Step
• Arranger Previous Chain Step
• Arranger: Go to First Chain Step
• Arranger: Next Chain Step
• Arranger: Previous Chain Step
• Assign Common Version ID to Selected
• Assign to Voice 1 and Flip Stems
• Assign to Voice 2 and Flip Stems
• Audio Polish (Normalize + Fades)
• Auto Select Events Under Cursor and Track Follow
• Auto-Color Tracks by Type
• Auto-Latch Mode + Enable Write on All Tracks
• Back Up Project
• Back Up Project Including Pool
• Back Up Project Then Export Audio Mixdown
• Beam Notes Together
• Beam Selected Notes Together
• Boost Event Volume (x2) and Bounce
• Bounce All Audio (Full Project)
• Bounce All Audio and Save New Version
• Bounce All Audio Full Project
• Bounce and Minimize Audio Files
• Bounce Audio and Close Gaps
• Bounce Audio and Disable Track
• Bounce Audio and Find in Pool
• Bounce Audio and Minimize File
• Bounce Audio and Minimize File Size
• Bounce Audio and Open Pool
• Bounce Audio and Remove Fades
• Bounce Audio Events and Close Gaps
• Bounce Audio then Create Sampler Track
• Bounce Audio Then Restore to Origin
• Bounce Comp Selection to New File
• Bounce De Audio Seleccionado
• Bounce De Todo El Audio Proyecto Completo
• Bounce MIDI Parts to Single Event
• Bounce MIDI Parts To Single Event
• Bounce Selected Audio
• Bounce Selected Audio
• Bounce Selected Audio and Save Project
• Bounce Selected Audio Event in Place
• Bounce Selected Audio Events
• Bounce Selected Audio to New File
• Bounce Selection Then Unmute Events
• Bounce with Fades
• Bounce, Deselect and Return to Zero
• Bounce, Freeze and Hide Track
• Bypass All — Inserts, EQs and Sends
• Bypass All EQs in Mixer
• Bypass All EQs In Mixer
• Bypass All Inserts in Mixer
• Bypass All Inserts In Mixer
• Bypass All Processing and Save Snapshot
• Bypass All Sends and View Routing
• Bypass Inserts and EQ in MixConsole
• Bypass Inserts and EQ on All Channels
• Bypass Inserts on Selected Tracks Then Show Mixer
• Bypass Sends and Channel Strip
• Bypass, Discard DOP and Remove Fades
• Calculate Hitpoints
• Calculate Hitpoints and Create Slices
• Calculate Hitpoints and Slice Loop
• Cancel Listen and Disable Click
• Cancel Listen and Remove Dim
• Cancel Listen Mode (Control Room)
• Cancel Listen Mode and Disable Dim
• Cancel Listen Mode and Stop
• Cancel Speaker Solo and Remove Dim
• Capture Global Retrospective Recording
• Check and Remove Missing Pool Files
• Check Crossfade and Bounce
• Check Mono Compatibility
• Chord Editing Add To Chord Track
• Chord Editing Match With Chord Track
• Chord Editing: Add to Chord Track
• Chord Editing: Match with Chord Track
• Chord Inversion Move Down
• Chord Inversion Move Up
• Chord Inversion Up Then Quantize MIDI
• Chord Inversion: Move Down
• Chord Inversion: Move Up
• Chord Pad: Next Voicing with More Tensions
• Chord Pad: Previous Voicing with Fewer Tensions
• Chord Pad: Transpose Up and Latch
• Chords To MIDI
• Chords to MIDI and Open Key Editor
• Clean MIDI and Bounce
• Clean MIDI: Delete Doubles and Overlaps (Mono)
• Clean Up Automation on Selected Tracks
• Clean Up Lanes
• Clean Up Lanes After Comping
• Clean Up Lanes and Bounce Comp
• Clean Up Lanes and Close Gaps
• Clean Up Lanes and Remove Empty Tracks
• Clean Up Lanes and Select All
• Clean Up Lanes then Remove Empty Tracks
• Clean Up Project View
• Close All Insert Editors and Show EQ Rack
• Close All Insert Editors for Selected Channel
• Close All Plug In Windows
• Close All Plug-in Windows
• Close All Plug-ins and Reset Meters
• Close All Plug-Ins and Unlink Channels
• Close All Plugin Windows in MixConsole
• Close All Plugin Windows in Mixer
• Close All Plugin Windows In Mixer
• Close All Windows
• Close All Windows
• Close Gaps After Comping
• Close Gaps After Lane Comp Edit
• Close Gaps and Crossfade
• Close Gaps Between Audio Slices
• Close Gaps then Create Sampler Track
• Close Gaps with Crossfade
• Close Gaps with Crossfade After Comp
• Collapse All Visible Folders
• Collapse Folders Then Fold All Tracks
• Collapse Tracks and Zoom Full
• Collapse Tracks to 1 Row and Zoom Full
• Color All Tracks then Fold All
• Color and Lock Selected Events
• Color and Rename Selected Track
• Color Notes by Voice and Move to Voice 1
• Color Selected and Move to Front
• Color Selected Tracks
• Color Selected Tracks and Fold Them
• Compact Tracks to 1 Row and Zoom In
• Compress MIDI Velocity Range
• Configure Quantize then Apply Iteratively
• Consolidate Note Expression Overlaps and Bounce
• Convert Chord Track to MIDI and Bounce
• Convert Chord Track to MIDI and Quantize
• Convert Pedals, Clean Controllers and Quantize
• Convert to Note Expression and Trim to Note Length
• Copy Cycle Data Then Duplicate Selection
• Copy Data Inside Cycle then Paste
• Copy Loop Selection and Paste Relative to Cursor
• Crear Slices De Audio Desde Hitpoints
• Create Audio Slices from Hitpoints
• Create Lanes from Track Versions
• Create Lanes From Versions
• Create Markers From Hitpoints
• Create New Track Version
• Create New Track Version
• Create New Workspace
• Create New Workspace
• Create Sampler Track
• Create Sampler Track
• Create Sampler Track and Open Editor
• Create Sampler Track from Selected Audio
• Create Track Versions from Lanes
• Create Tracks from Comped Lanes
• Create Tracks from Lanes
• Create Tracks from Lanes and Clean Up
• Create Versions from Lanes
• Create Versions From Lanes
• Create Warp Tabs from Hitpoints
• Crop Project to Loop Range
• Crop Range and Bounce Audio
• Crop Range and Zoom Full
• Crop Range to Comp Selection
• Crop Range, Bounce, Then Create Sampler Track
• Crop to Range and Export Audio Mixdown
• Cross Notes to Staff Above
• Cross Notes to Staff Above then Reset
• Crossfade and Close Gaps Between Events
• Cut Head and Move Event to Cursor
• Cut Time (Remove Range)
• Cut Time at Selection
• Cut Time Remove Range
• Cycle Follows Range and Range Tool Splits Events
• Cycle Follows Range Selection and Locate on Click
• Cycle Record in Lanes
• Deactivate All Solo
• Deactivate All Solo and Unmute All Tracks
• Decrease Audio Clip Gain
• Decrease Project Tempo
• Deep Session Reset
• Defeat All Solo in MixConsole
• Delete All Automation Beyond Cursor on Selected Tracks
• Delete All Automation in Project
• Delete All Automation In Project
• Delete All Automation on Selected Tracks
• Delete All Data on Selected Tracks Before Cursor
• Delete All Muted Events and Parts
• Delete All Muted Tracks
• Delete All Project Automation
• Delete All Project Automation + Hide All
• Delete and Hide Automation on Selected Tracks
• Delete Audio Overlaps
• Delete Audio Overlaps
• Delete Automation Beyond Cursor on Selected Tracks
• Delete Automation Beyond Cursor then Stop Write
• Delete Automation in Range + Fill Gaps on Selected Tracks
• Delete Automation Inside Cycle on Selected Tracks
• Delete Automation of Selected Tracks
• Delete Automation Of Selected Tracks
• Delete Automation on Selected Tracks
• Delete Automation on Selected Tracks + Show Used
• Delete Automation on Selected Tracks then Toggle Write Off
• Delete Controllers then Quantize
• Delete Cycle Automation Then Enable Read
• Delete Doubles and Overlaps (Mono)
• Delete Doubles then Quantize
• Delete Duplicate MIDI Notes
• Delete Duplicate MIDI Notes
• Delete Empty Parts and Tracks
• Delete Empty Parts then Remove Empty Tracks
• Delete Inactive Versions (All Tracks)
• Delete Inactive Versions (Selected Tracks)
• Delete Inactive Versions All Tracks
• Delete Inactive Versions and Fold Tracks
• Delete Inactive Versions Selected Tracks
• Delete MIDI Continuous Controllers
• Delete Muted Events then Clean Up Lanes
• Delete Muted Events Then Remove Empty Parts
• Delete Muted Events then Remove Empty Tracks
• Delete Muted Tracks and Remove Unused Media
• Delete Overlapping MIDI Notes (Mono)
• Delete Overlapping MIDI Notes Mono
• Delete Overlaps Then Apply Crossfade
• Delete Selected Track Automation and Hide
• Delete Small Parts and Remove Empty Tracks
• Delete Small Parts Then Remove Empty Tracks
• Delete Time in Loop Range
• Desarmar Todas Las Pistas De Audio
• Deselect All
• Detect and Make Chords from MIDI
• Detect Chords from MIDI
• Detect Hitpoints and Slice Audio
• Detect Silence and Bounce
• Detect Silence and Close Gaps
• Detect Silence and Delete Silent Regions
• Detect Silence in Audio Events
• Detect Silence In Audio Events
• Detect Silence Then Mute Events
• Detect Silence, Close Gaps with Crossfade
• Detectar Silencio En Eventos De Audio
• Dim Control Room Monitor
• Dim Control Room Output
• Dim Monitor & Activate Reference Level
• Dim Monitor and Activate Talkback
• Dim Monitor and Enable Click for Tracking
• Dim Monitor and Enable Listen Bus
• Dim Output and Enable Listen
• Disable Cycle and Return to Zero
• Disable Dim and Reference Level
• Disable Record All Tracks Then Enable Visible
• Disable Record Enable on All Tracks
• Disable Record on All Tracks and Remove Empty Tracks
• Disable Record on All Tracks then Disarm Mixer
• Disable Selected Track
• Disarm All Audio Tracks
• Disarm All Audio Tracks
• Disarm All Audio Tracks and Disable Click
• Discard Direct Offline Processing
• Discard Direct Offline Processing
• Discard DOP & Remove Fades
• Dissolve MIDI Part and Bounce
• Dissolve Note Expression and Bounce
• Dissolve Part and Bounce MIDI
• Dissolve Part Then Export Selected Events
• Divide at Hitpoints then Create Sampler Track
• Divide Audio Events at Hitpoints
• Divide Audio Events At Hitpoints
• Dividir Eventos De Audio En Hitpoints
• Drop 2 Voicing then Invert Up
• Drop 2 Voicing, Inversion Up, Match Chord Track
• Drop 2 Voicing, Inversion Up, Notes to Voices
• Drop 2+4 Voicing and Inversion Up
• Drop 2+4 Voicing, Match Chord Track, Quantize
• Drop 3 Voicing, Inversion Down, Match Chord Track
• Drop 3 Voicing, Invert Up, and Add Tensions
• Drums — Calculate Hitpoints and Slice Audio
• Drums — Detect Silence and Delete
• Drums — Humanize Prep (Delete Doubles, Quantize, Fixed Velocity)
• Drums — MIDI Clean and Bounce
• Duplicate and Fill to Locators
• Duplicate Event and Nudge Right
• Duplicate Event for Comp Comparison
• Duplicate Event then Create Sampler Track
• Duplicate Lane Event for Alternate Version
• Duplicate Selected Events
• Duplicate Selected Events
• Duplicate Selected Track
• Duplicate Selected Track
• Duplicate Track and Freeze Original
• Duplicate Track and Rename It
• Duplicate Track for Vocal Doubling
• Duplicate Track Version
• Duplicate Tracks Then Freeze Originals
• Edit Mode (8 Tracks + Unfold)
• Eliminar Superposiciones De Audio
• Enable Auto Punch and Record from Left Locator
• Enable Auto Punch In and Out
• Enable Auto Select Events Under Cursor
• Enable Automatic Track/Channel Color Mode
• Enable Automation Read and Show Used
• Enable Automation Read Mode
• Enable Automation Write Mode
• Enable Autoscroll with Stationary Cursor
• Enable Bidirectional Track/Event Selection Follow
• Enable Click & Activate Studio 1 Cue
• Enable Click and Listen Bus
• Enable Click with Precount
• Enable Crosshair Cursor Lines and Tool Extra Info
• Enable Cycle and Cycle Record Mode
• Enable Cycle Recording with Metronome
• Enable Editor Content Follows Event Selection
• Enable Enlarge Selected Track
• Enable Grid Snap and Split Loop at Cursor
• Enable Listen Mode
• Enable Listen Mode and Play
• Enable Listen Mode and Start Playback
• Enable Listen Mode in Mixer
• Enable Listen Mode with Dim
• Enable Metronome and Input Tempo
• Enable Metronome and Precount
• Enable Metronome with Precount
• Enable MIDI Auto Quantize and Record
• Enable MIDI Thru and ASIO Latency Compensation
• Enable Pre-roll and Post-roll
• Enable Pre-Roll and Record from Selection Start
• Enable Pre-Roll and Start Recording
• Enable Pre/Post-Roll and Cycle for Loop Recording
• Enable Pre/Post-Roll and Play Selection
• Enable Precount and Start Recording
• Enable Precount, Metronome, and Record
• Enable Punch In Recording
• Enable Punch In/Out with Pre-Roll
• Enable Punch Out Recording
• Enable Quick Zoom and Use Selection Start as Zoom Anchor
• Enable Quick Zoom with Selection Anchor
• Enable Re-Record and Return to Zero
• Enable Re-Record Mode and Start Recording
• Enable Read & Write Automation on All Tracks
• Enable Read Automation on All Tracks
• Enable Reference Level and Solo Front Speakers
• Enable Right-Click Toolbox and Tool Switch Notification
• Enable Selected Track
• Enable Snap for Precise Lane Comping
• Enable Snap to Grid then Create Sampler Track
• Enable Snap to Zero Crossing
• Enable Snap to Zero Crossing and Show Fades
• Enable Snap to Zero Crossing and Show Waveforms
• Enable Talkback and Activate Studio 1 Cue
• Enable Tempo Rehearsal Mode with Metronome
• Enable Then Cancel Listen Bus
• Enable Write Automation on All Tracks
• Enable Write on Selected Tracks + Fill to End
• End Session Cleanup
• End Session: Deactivate Solos, Save and Backup
• Enlarge Selected Track and Follow Event Selection
• Enlarge Selected Track and Scroll to It
• Enlarge Selected Track and Show Inspector Sends
• Enlarge Selected Track in Project Window
• Enter Tempo Then Open Tempo Track
• Expand Direct Routing Rack in MixConsole
• Expand EQ Rack in MixConsole
• Expand EQ View and Bypass Sends
• Expand Inserts & EQ in Inspector
• Expand Inserts and EQ in MixConsole
• Expand Inserts Rack and Open First Insert Plugin
• Expand Inserts Rack and Open First Plugin
• Expand Inserts Rack and Open Insert 1
• Expand Inserts Rack and Open Insert Slot 1 Editor
• Expand Inserts Rack in MixConsole
• Expand Inserts, Sends, and Routing in MixConsole
• Expand Routing and Direct Routing Racks
• Expand Sends and Routing Racks
• Expand Sends Rack in MixConsole
• Expand Sends, Routing & Channel in Inspector
• Expand Tracks Full Height and Zoom In
• Export Audio Mixdown
• Export Audio Mixdown (Quick)
• Export Chord Track to Bounced MIDI
• Export MIDI Between Locators
• Export MIDI File
• Export MIDI File and Save New Project Version
• Export Pool and Back Up Project
• Export Pool and Save Project
• Export Score as PDF
• Export Selected Events
• Export Selected Events as MIDI Loop
• Export Selected Events Then Save Project
• Export Selected Tracks as Archive
• Extract Audio from Video
• Extract Groove from Audio Event
• Extract Groove from MIDI Part
• Fade In to Cursor and Snap Point to Cursor
• Fade In to Cursor then Bounce
• Fade Out to Cursor and Close Gaps
• Fade Out to Cursor then Bounce
• Fade Out to Cursor Then Close Gaps
• Fill Loop and Fill Gaps in Automation
• Fill Loop and Show All Used Automation
• Fill Loop on Selected Tracks + Show Used Automation
• Fill Loop Range from Clipboard
• Fill Loop with Automation
• Fill Loop with Beat Pattern
• Fill Score View
• Film — Cue Export Prep and Mixdown
• Film — Score Notation Prep
• Film — Set and Define Tempo from Audio Reference
• Find and Enlarge Selected Track
• Find Audio in Pool then Create Sampler Track
• Find Missing Audio Files
• Find Selected Event in Pool then Create Sampler Track
• Find Track and Enlarge It
• Find Track then Rename It
• Fixed Velocity, Quantize and Legato
• Flatten Chord Track to MIDI
• Flatten Realtime Processing
• Flatten Realtime Processing and Bounce
• Flip Note Stems
• Flip Stems and Beam Notes Together
• Flip Stems and Switch to Page View
• Focus Next Plug In Window
• Focus Next Plug-in Window
• Focus View on Selected Track
• Fold All Tracks
• Fold All Tracks
• Fold All Tracks and Color Selection
• Fold All Tracks Then Color Selected
• Fold Selected Track and Color It
• Freeze All Instrument Tracks
• Freeze and Disable Selected Track
• Freeze and Fold Selected Tracks
• Freeze Instrument and Disable Track
• Freeze MIDI Track Params, Length and Quantize
• Freeze Quantize (Commit)
• Freeze Quantize on MIDI
• Freeze Selected Instrument Tracks
• Freeze Selected Track
• Freeze Selected Tracks
• Freeze Selected Tracks and Fold
• Freeze Selected Tracks Then Export
• Freeze Selected Tracks Then Export Mixdown
• Freeze Tracks with Current Freeze Settings
• Freeze Trim Automation and Hide All
• Freeze Trim Automation on Selected Tracks
• Full Channel Overview in Inspector
• Full Dub Session Prep (8 Steps)
• Full End-of-Session Chain
• Full Export Preparation Chain
• Full MIDI Cleanup
• Full MIDI Cleanup: Delete Doubles, Quantize, Legato
• Full MIDI Polish
• Full MIDI to Audio Conversion Chain
• Full Mix Check — Solo Off, Automation On, Reset Meters
• Full Mix Session Startup
• Full New Session Setup
• Full Precision Edit Chain
• Full Stems Export Preparation Chain
• Glue Comp Events and Bounce
• Glue Events and Bounce to New File
• Glue Events and Bounce to Single File
• Glue Selected Events and Bounce
• Glue Slices into Part and Open Editor
• Go to End and Post-Roll Playback
• Go to Left Locator and Zoom
• Go to Next Marker and Recall Its Cycle Region
• Go to Next Marker and Set Left Locator
• Go to Previous Marker and Set Right Locator
• Go to Project End and Set Right Locator
• Go to Project Start
• Go to Punch In Position and Record
• Go to Start and Play
• Group Selected Events
• Group Selected Tracks and Color Them
• Guitar — Define Tempo from Event and Bounce
• Guitar — Flatten Realtime Processing and Bounce
• Hard Quantize and Freeze All
• Hard Quantize MIDI
• Hide All Automation and Zoom 8 Tracks
• Hide All Automation Lanes
• Hide All Channels in MixConsole
• Hide All Tracks (Visibility Reset)
• Hide All Tracks via Project Logical Editor
• Hide FX, Group, and Return Channels
• Hide Group and Return Channels
• Hide Group and VCA Channels
• Hide Group Channels and Show Connected
• Hide Groups and Returns, Show Selected
• Hide Instrument and MIDI Channels in MixConsole
• Hide MIDI Channels in MixConsole
• Hide Muted and Sync Visibility
• Hide Muted Tracks
• Hide Muted Tracks and Clean Lanes
• Hide Muted Tracks and Focus Active Ones
• Hide Selected Channels in MixConsole
• Hide Selected Channels in Mixer
• Hide Selected Channels In Mixer
• Hide Signposts and Show Bar Numbers
• Hide Unused Channels, Show Playing, Reset Meters
• Hide VCA and Output Channels
• Hold Meter Peaks and Show Meter Bridge
• Horizontal Zoom to Selection and Play
• Import Audio File and Open Pool
• Import Audio File into Project
• Import Audio from CD into Pool
• Import Audio from Video File
• Import MIDI File and Open Pool
• Import MIDI File and Save Pool
• Import MIDI File into Project
• Import Pool File and Open Pool
• Import Pool File and Refresh Views
• Import Pool from External File
• Import Track Archive into Project
• Import Track Archive into Session
• Import Tracks from Another Project
• Import Video and Extract Audio
• Import Video File into Project
• Increase Audio Clip Gain
• Increase Project Tempo
• Input Tempo and Time Signature
• Input Tempo Value
• Input Tempo, Return to Zero, and Play
• Input Time Signature
• Input Time Signature and Tempo
• Insert Beat at Locator and Play Cycle
• Insert Beat Pattern at Cursor
• Insert Beat Pattern at Left Locator
• Insert Cycle Marker from Selection
• Insert Cycle Marker, Enable Loop, and Play
• Insert into Project at Cursor
• Insert Into Project At Cursor
• Insert Marker and Jump to Next
• Insert Marker at Current Position
• Insert Marker Then Open Markers Window
• Insert Marker, Stop, and Return to Zero
• Insert MIDI Program Change
• Insert Retrospective MIDI Recording (Cycle)
• Insert Retrospective MIDI Recording (Linear)
• Insert Retrospective Recording
• Insert Selected Media at Cursor
• Insert Silence at Cursor
• Insert Silence Between Locators
• Insert System Break and Fill View
• Insert System Break and Hide Signposts
• Insert System Break in Score
• Invert Phase and Bounce
• Invert Phase and Remove All Fades
• Invert Phase then Create Sampler Track
• Invert Phase, Bounce, Then Create Sampler Track
• Invert Selection
• Invert Selection and Hide Unselected in Mixer
• Invertir Eventos De Audio Seleccionados
• Iterative Quantize & Open Velocity Editor
• Iterative Quantize MIDI
• Iterative Quantize Notes and Ends
• Iterative Quantize then Apply Legato
• Iterative Quantize Then Freeze
• Jump to Next Arranger Part
• Jump to Next Marker and Set Left Locator
• Jump to Next Marker and Set Right Locator
• Jump to Previous Marker and Set Locators to Selection
• Keys — Pedal to Notes, Clean Controllers and Bounce
• Latch Chord Pads and Cycle to Next Voicing
• Latch Chord Pads and Record
• Latch Chord Pads and Start Recording
• Link Selected Channels and Enable Q-Link
• Link Selected Channels and Expand Routing
• Link Selected Channels and Reveal Routing Rack
• Link Selected Channels and Show Routing
• Link Selected MixConsole Channels
• Link Selected Mixer Channels
• Listen Enable then Cancel
• Listen Mode with Dim and Talkback
• Load FX Chain Preset and Expand Inserts View
• Load Next Track Preset
• Load Next Track Preset
• Load Previous Track Preset
• Load Previous Track Preset
• Load Selected Audio into Sampler
• Load Settings onto Selected Channel
• Locate and Zoom to Selection
• Locate Next Marker and Play
• Locate Previous Marker and Play
• Locate Selection Start and Insert Marker
• Lock Record and Start Recording
• Lock Score Layout
• Lock Selected Events
• Loop Locators and Record
• Loop Selection and Insert Cycle Marker
• Loop Selection and Play
• Loop Selection and Zoom to Locators
• Loop Selection Solo and Play
• Loop Selection with Precount
• Make All DOP Processes Permanent
• Make Chords and Add to Chord Track
• Make Chords and Map MIDI to Chord Track
• Make Chords and Map to Chord Track
• Make Chords and Set Up Scales
• Make DOP Permanent & Bounce
• Map MIDI to Chord Track and Quantize
• Map MIDI to Chord Track Scale
• Map to Chord Track and Bounce MIDI
• Map to Chord Track then Apply Legato
• Mark Event as Region then Create Sampler Track
• Mastering Check Chain
• Match Chord Track then Quantize MIDI
• Match MIDI Notes to Chord Track
• Match MIDI to Chord Track then Map to Scale
• Match Notes to Chord Track and Quantize
• Merge All MIDI to One Part
• Merge Events to Part and Bounce
• MIDI Panic (All Notes Off)
• Minimize All Windows
• Minimize All Windows
• Minimize Audio File Size
• Minimize Audio File Then Export Mixdown
• Minimize Audio Files and Back Up Project
• Mix Final Check Chain
• Mix Reference Check (Bypass All)
• Move All Automation to Back of Track
• Move Chord Inversion Down and Match Chord Track
• Move Chord Inversion Up and Match Chord Track
• Move Inversion Down and Reduce Tensions
• Move Notes to Voice 1 and Flip Stems
• Move Notes to Voice 2 and Flip Stems
• Move Selected Events to Cursor
• Move Selected Tracks to Folder and Color
• Move Selected Tracks to New Folder
• Move to Previous Track and Color It
• Move Track to Folder and Color
• Mute and Freeze Selected Tracks
• Mute Event and Close Gaps
• Mute Events and Clean Up Lanes
• Mute Events and Remove Fades
• Mute Events in Loop Range for Comp
• Mute Original Event then Create Sampler Track
• Mute Selected Event on Lane
• Mute Then Unmute Selected Events
• Navigate Back
• Navigate Forward
• Navigate Forward
• Navigate to Bottom Track
• Navigate To Bottom Track
• Navigate to Top Track
• Navigate To Top Track
• New Version, Punch-In Cycle and Record
• Next Chord Voicing and Play
• Next Voicing with More Tensions
• Normalizar Audio Seleccionado
• Normalize Selected Audio
• Normalize Selected Audio
• Normalize Selected Audio to Peak
• Notes to Voices then Chords to MIDI
• Nudge Event End Right
• Nudge Event End Right
• Nudge Event One Bar Left
• Nudge Event One Bar Right
• Nudge Event Start Left
• Nudge Event Start Left
• Nudge Event Start Left (Extend)
• Nudge Left
• Nudge Right
• Nudge Selected Events Left
• Nudge Selected Events Right
• Open All Folders Then Unfold All Tracks
• Open Audio Alignment Panel
• Open Audio Connections
• Open Audio Part Editor in Window
• Open Audio Part Editor In Window
• Open Channel Settings for Selected Channel
• Open Channel Settings Window
• Open Chord Pad Setup
• Open Chord Pad Setup and Enable Latch
• Open Chord Pads
• Open Control Room Mixer
• Open Control Room Mixer
• Open Direct Offline Processing
• Open Direct Offline Processing with Auto Apply
• Open DOP and Apply Favorite 1
• Open DOP, Apply Process, and Make Permanent
• Open Drum Editor for Selection
• Open Drum Editor in Lower Zone
• Open Drum Editor In Lower Zone
• Open Drum Editor in Window
• Open Drum Editor In Window
• Open Export Audio Mixdown Dialog
• Open Full Channel View in Inspector
• Open Insert Editors for Slots 1 and 2
• Open Insert Slot 1 and Expand Inserts Rack
• Open Insert Slot 1 Editor for Selected Channel
• Open Insert Slots 1 and 2 Plugin Editors
• Open Key Commands Editor
• Open Key Editor and Show Velocity Lane
• Open Key Editor for MIDI Parts in Cycle then Select All
• Open Key Editor for MIDI Parts Inside Cycle then Zoom to Selection
• Open Key Editor in Lower Zone
• Open Key Editor In Lower Zone
• Open Key Editor in Window
• Open Key Editor In Window
• Open Layout Settings and Lock Layout
• Open Loop Browser
• Open Loop Browser
• Open Loop Browser
• Open Markers Window
• Open Markers Window and Insert Marker
• Open MediaBay
• Open MediaBay
• Open MediaBay
• Open Metronome Setup
• Open Metronome Setup and Enable Click
• Open Metronome Setup then Enable Click
• Open MIDI List Editor
• Open MixConsole (Mixer)
• Open MixConsole in Lower Zone
• Open MixConsole In Lower Zone
• Open MixConsole Mixer
• Open Notation Options
• Open Notation Options and Switch to Transposed Pitch
• Open Output Bus Setup
• Open Panner and Channel Settings for Selected Channel
• Open Plug In Manager
• Open Plug-in Manager
• Open Plugin Editor on Load and Keep Always on Top
• Open Plugin Manager
• Open Pool and Empty Trash
• Open Pool and Reconstruct Missing Files
• Open Pool and Remove Unused Media
• Open Pool, Reconstruct, and Refresh Views
• Open Pool, Rescan Disk, and Refresh Views
• Open Preferences
• Open Project Colors Panel
• Open Project Setup
• Open Quantize Setup Dialog
• Open Quantize Setup Then Apply
• Open Quantize Setup Then Quantize
• Open Quantize Setup to Apply Groove
• Open Sample Editor
• Open Sample Editor in Window
• Open Sample Editor In Window
• Open Sampler Track Editor
• Open Score Editor
• Open Score Editor and Fill View
• Open Score in Page View
• Open Score Layout Settings
• Open Score Settings
• Open Score Settings and Fill View
• Open Sound Browser
• Open Sound Browser
• Open Sound Browser
• Open Studio Setup
• Open Studio Setup
• Open Tempo Track
• Open Tempo Track and Run Tempo Detection
• Open Tempo Track and Tap Tempo
• Open Tempo Track Editor
• Open Tempo Track for Editing
• Open Track Preset Browser
• Open Track Preset Browser
• Open Undo History
• Open VariAudio and Select All
• Open Velocity Dialog then Apply Fixed Velocity
• Open Velocity Editor then Quantize Lengths
• Open Virtual Keyboard
• Open Virtual Keyboard
• Open VST Connections
• Open VST Connections
• Open VST Instruments Rack
• Open VST Instruments Rack
• Open VST Instruments Rack
• Open VST Performance Monitor
• Open VST Performance Monitor
• Overview Mode (Zoom Out + Fold)
• Pedals to Note Length then Legato
• Perform Export of Selected Events
• Perform Export Selected Events (No Dialog)
• Pitch Shift Audio Event
• Play Selection
• Play Selection with Pre-roll and Post-roll
• Play Until Next Marker
• Plugins Always on Top and Open on Load
• Post-roll from Selection End
• Post-roll from Selection End and Play
• Pre-Export Check
• Pre-roll and Play from Selection Start
• Pre-roll, Play Selection, then Post-roll
• Precount and Record
• Prepare ADR Cycle Record
• Prepare Archive
• Prepare Archive and Save Project
• Prepare Archive from Pool
• Prepare Archive then Back Up Project
• Preview Full Crossfade (In, Crossfade, Out)
• Previous Chord Voicing and Play
• Previous Voicing with Fewer Tensions
• Print FX Chain to Audio
• Print Score
• Producer — Full Mix Ready State
• Punch Out of Latch + Fill to Punch Point
• Punch-In Record
• Q-Link + Expand Routing for Batch Output Assignment
• Q-Link and Expand Inserts Rack
• Q-Link Bypass Inserts on All Selected Channels
• Quantize All Pitches to Active Scale
• Quantize and Bounce MIDI Part
• Quantize Lengths Then Apply Legato
• Quantize MIDI and Freeze Quantize
• Quantize MIDI Note Ends
• Quantize MIDI Note Lengths
• Quantize MIDI Notes
• Quantize MIDI Notes
• Quantize Note Ends and Lengths
• Quantize Note Ends Only
• Quantize Note Ends then Undo Start Quantize
• Quantize Note Lengths
• Quantize Pitches to Scale and Show Scale Guides
• Quantize Selected MIDI
• Quantize Starts and Ends
• Quantize Then Apply Legato
• Quantize Then Delete Doubles
• Quantize Then Undo to Compare
• Quantize to 16th Note then Bounce MIDI
• Quantize to Eighth Note then Apply Legato
• Quantize to Eighth Note Then Bounce MIDI
• Quantize to Sixteenth Then Open Key Editor
• Quantize, Delete Doubles & Apply Legato
• Quantize, Legato and Remove Duplicates
• Quick Mix Check
• Recall Cycle Marker 1 and Enable Cycle
• Recall Cycle Marker 1 and Enable Loop
• Recall Cycle Marker 1 and Loop
• Recall Cycle Marker 1 and Play Loop
• Recall Cycle Marker 2 and Play
• Recall Cycle Marker 2, Loop and Play
• Recall Cycle Marker 3 and Loop
• Recall Mix Snapshot 1 and Show All
• Recall MixConsole Snapshot 1
• Recall MixConsole Snapshot 1
• Recall MixConsole Snapshot 2
• Recall MixConsole Snapshot 2
• Recall MixConsole Snapshot 3
• Recall MixConsole Snapshot 3
• Recall Snapshot 1 and Reset Meters
• Recall Workspace 1
• Recall Workspace 2
• Recall Workspace 3
• Recall Workspace 4
• Recall Workspace 5
• Recall Workspace 6
• Recall Workspace 7
• Recall Workspace 8
• Recall Zoom Preset 1
• Recall Zoom Preset 1 and Return to Zero
• Recall Zoom Preset 2
• Recall Zoom Preset 3
• Reconstruct Missing Pool Files
• Record Enable and Monitor Track
• Record from Left Locator
• Record from Left Locator with Metronome
• Record in Merge (Overdub) Mode
• Record in Replace Mode
• Record MIDI as Note Expression
• Record with Cycle Loop
• Record-Enable Track, Monitor, and Precount
• Redo MixConsole Change
• Redo MixConsole Step
• Rehearsal Mode with Metronome
• Rehearsal Mode with Metronome On
• Remove All Fades from Audio
• Remove All Fades from Selection
• Remove All Fades From Selection
• Remove All MIDI Controllers
• Remove Fades and Apply Crossfade
• Remove Fades and Close Gaps
• Remove Fades, Bounce, then Create Sampler Track
• Remove Missing Files and Prepare Archive
• Remove Missing Files from Pool
• Remove Note Expression and Bounce
• Remove Overlaps and Add Fades
• Remove Selected Tracks
• Remove Unused Audio Files
• Remove Unused Media
• Remove Unused Media
• Remove Unused Media and Empty Pool Trash
• Rename & Renumber Audio Tracks then Set Color
• Rename Audio Tracks Then Set Track Color
• Rename Audio Tracks then Show All in Mixer
• Rename First Selected Track
• Rename First Selected Track Then Color
• Rename Selected Events
• Rename Selected Events and Color
• Rename Selected Events then Color
• Render In Place
• Render in Place (Dry Signal)
• Render in Place (With Effects)
• Repeat Events to Fill Loop
• Reset All Meters in Mixer
• Reset All Meters In Mixer
• Reset and Remove Beaming
• Reset Beaming and Fill View
• Reset Meters and Loudness Display
• Reset Mix State
• Reset Recording State
• Respell Note Above and Add Cautionary Accidentals
• Respell Note Up and Add Cautionary Accidentals
• Respell Note Using Name Above
• Restore All Windows
• Restore All Windows
• Restrict Polyphony, Delete Overlaps and Bounce
• Retrospective Record (Cycle)
• Retrospective Record (Linear)
• Retrospective Record and Bounce
• Return to Zero and Play
• Return to Zero and Set Left Locator
• Return to Zero and Start Recording
• Reveal All Channels and Show Routing
• Reveal All Channels in MixConsole
• Reveal All Mixer Channels
• Reverse MIDI and Bounce
• Reverse MIDI then Quantize
• Reverse Selected Audio Events
• Reverse Selected Audio Events
• Revert to Last Saved Version
• Route Selected to Group Channel
• Run Tempo Detection
• Save and Write MIDI File to Project Folder
• Save Current Workspace
• Save MixConsole Snapshot
• Save MixConsole Snapshot
• Save New Project Version
• Save New Version and Backup
• Save New Version Before Export
• Save New Version Then Export Audio Mixdown
• Save Pool and Back Up Project
• Save Pool to External File
• Save Project
• Save Project and Create New Track Version
• Save Project and Export MIDI File
• Save Project and Mixer Snapshot
• Save Project As New Version
• Save Selected Channel Settings
• Save Selected Channel Settings and Show Only Selected
• Save Snapshot and Bypass Inserts + EQs
• Save Zoom Memory and Zoom to Selection
• Save Zoom Preset 1
• Score Page View
• Select All and Apply Fixed Velocity
• Select All and Delete All Controllers
• Select All and Export MIDI
• Select All and Export MIDI File
• Select All and Export Selected Events
• Select All and Freeze Quantize
• Select All and Iterative Quantize
• Select All and Quantize Lengths
• Select All and Quantize MIDI
• Select All and Quantize Note Ends
• Select All And Set Project Wide Loop
• Select All and Set Project-Wide Loop
• Select All and Undo Quantize
• Select All and Unmute Comp Events
• Select All Bounce And Stop
• Select All Data Before Cursor Then Delete
• Select All Data Beyond Cursor Then Delete
• Select All Events and Bounce Audio
• Select All Events and Clean Up Lanes
• Select All Events and Color Them
• Select All Events and Mute Them
• Select All Events and Rename Them
• Select All Events on Track
• Select All Events on Track then Clean Lanes
• Select All Events Then Export Audio Mixdown
• Select All Events, Bounce, Then Create Sampler Track
• Select All MIDI and Quantize
• Select All MIDI and Transpose Up
• Select All MIDI Notes
• Select All Muted Events then Delete
• Select All Tracks
• Select All Tracks and Apply Color
• Select All Tracks and Export as Track Archive
• Select All Tracks and Freeze
• Select All Tracks and Freeze Them
• Select All Tracks and Remove Them
• Select All Tracks And Remove Them
• Select All Tracks and Set Color
• Select All Tracks and Show in MixConsole
• Select All, Bounce Audio, and Save
• Select All, Bounce Audio, Open Pool
• Select All, Bounce, and Disable Tracks
• Select All, Bounce, and Minimize
• Select All, Color, Then Rename First Track
• Select All, Quantize and Remove Duplicates
• Select All, Quantize Lengths, Then Iterative Quantize
• Select All, Quantize, and Bounce MIDI
• Select All, Quantize, then Legato
• Select All, Remove Fades, and Bounce
• Select All, Split at Loop, then Fill Loop
• Select All, Undo Quantize, then Iterative Quantize
• Select and Delete from Cursor to End
• Select Data Inside Cycle then Duplicate
• Select Events in Loop and Freeze Tracks
• Select Events in Loop Range and Color
• Select Events in Loop Range then Create Sampler Track
• Select Events in Loop Range Then Export
• Select Folddown 1 and Open Control Room
• Select Guitar Tracks then Bypass Their Inserts
• Select Guitar Tracks Then Show in Mixer
• Select in Loop and Bounce Audio
• Select in Loop and Bounce Comp
• Select In Loop and Crop Range
• Select in Loop and Repeat Events
• Select in Loop, Zoom and Play
• Select Loop and Cut Time
• Select Loop and Delete Time
• Select Loop Events, Freeze, and Fold
• Select Loop Range and Delete Time
• Select Loop Range and Duplicate
• Select Loop Range and Export Audio Mixdown
• Select Muted Events Then Delete
• Select Next Track and Color It
• Select Next Track and Rename
• Select Previous Track and Rename
• Select Speaker Set
• Select Speaker Set
• Select Tracks with Same Version ID
• Set and Define Tempo from Audio Event
• Set Automation Mode to Auto-Latch
• Set Automation Mode to Touch
• Set Automation Mode to Trim
• Set Fixed MIDI Velocity
• Set Fixed Tempo Mode
• Set Guitar-Style Chord Voicing
• Set Left Locator at Cursor
• Set Locators from Selection and Enable Cycle
• Set Locators from Selection and Loop
• Set Locators from Selection and Start Recording
• Set Locators from Selection and Zoom
• Set Locators to Selection and Activate Loop
• Set Locators to Selection and Enable Cycle
• Set Locators to Selection and Enable Loop
• Set Locators To Selection And Enable Loop
• Set Locators to Selection and Fill Loop
• Set Locators to Selection and Insert Bars
• Set Locators to Selection and Insert Cycle Marker
• Set Locators to Selection and Insert Silence
• Set Locators to Selection and Play Loop
• Set Locators to Selection and Split Range
• Set Locators to Selection then Input Tempo
• Set Locators to Selection Then Tap Tempo
• Set Locators, New Version and Record
• Set Locators, New Version and Record Clean
• Set Loop to Selection and Play
• Set Loop to Selection and Start Playback
• Set Marker 1 at Current Position
• Set MIDI Quantize to 1/16 Note
• Set MIDI Quantize to 1/32 Note
• Set MIDI Quantize to 1/4 Note
• Set MIDI Quantize to 1/8 Note
• Set MIDI Quantize To 116 Note
• Set MIDI Quantize To 132 Note
• Set MIDI Quantize To 14 Note
• Set MIDI Quantize To 18 Note
• Set Project Tempo from Audio then Create Sampler Track
• Set Project Tempo from Loop Then Create Sampler Track
• Set Punch In Position at Cursor
• Set Punch In/Out from Selection
• Set Punch Out Position at Cursor
• Set Punch Points from Selection via Locators
• Set Punch Points to Selection
• Set Punch Points to Selection and Record
• Set Punch Points to Selection and Start Recording
• Set Quantize Grid to 1 Bar
• Set Quantize Grid to 1/16
• Set Right Locator at Cursor
• Set Snap Point to Cursor and Send to Origin
• Set Snap to Events for Comp Editing
• Set Snap Type to Events
• Set Snap Type to Grid
• Set Tempo and Time Signature
• Set Tempo, Enable Precount and Record
• Set Touch Mode and Show All Volume Automation
• Set Track Color
• Set Trim Mode and Freeze All Trim Automation
• Set Up Scales and Enable Snap Pitch Editing
• Set Up Scales and Snap Pitches to Scale
• Setup Then Iterative Quantize
• Setup, Iterative Quantize, and Freeze
• Show All Channels and Reset Meters
• Show All Channels, Expand Sends and Routing
• Show All Insert + EQ Automation
• Show All Mixer Channels
• Show All Mixer Channels
• Show All Mixer Channels and Reset Meters
• Show All Send Automation + Suspend Writing Volume
• Show All Used Automation then Hide
• Show All Volume + Pan Automation
• Show All Volume Automation Lanes
• Show Audio Waveform
• Show Channel and Inserts Sections in Inspector
• Show Channels Active in Cycle Range
• Show Chord Pads Editor and Assistant
• Show Connected Channels and Close All Plug-ins
• Show Connected Channels and Expand Routing
• Show Connected Channels in MixConsole
• Show Cycle Channels and Expand Routing Rack
• Show Data and Event Details on Folder Tracks
• Show Drum Tracks Then Open Drum Editor
• Show EQ and Channel Strip in Inspector
• Show EQ and Sends in Inspector
• Show EQ Curve and Expand EQ Rack
• Show EQ Curve and Open Channel Settings
• Show EQ Curve and Open First Insert Editor
• Show EQ in MixConsole
• Show Event Names and Highlight Selected Borders
• Show Event Names and Highlight Selected Event Borders
• Show Event Volume Control and Curve
• Show Hitpoints on Selected Events and Show Fades
• Show Insert Slots in MixConsole
• Show Inserts and EQ in Inspector
• Show Inserts and Sends Full View in MixConsole
• Show Inserts and Sends in Inspector
• Show Inspector and Zoom 8 Tracks
• Show Loudness Meter
• Show Marked Tracks
• Show MIDI Inserts and Modifiers in Inspector
• Show MIDI Inserts, Modifiers and Sends in Inspector
• Show Next Tab
• Show Next Tab
• Show Note Expression Data and Open Editor
• Show Only Channels Active in Cycle Range
• Show Only Currently Playing Channels
• Show Only Playing Channels in Mixer
• Show Only Selected Tracks
• Show Only Selected Tracks in Mixer
• Show Only Used Channels in Mixer
• Show Previous Tab
• Show Previous Tab
• Show Quick Controls and Channel Section in Inspector
• Show Routing and Direct Routing in Inspector
• Show Routing and Inserts in Inspector
• Show Routing in Inspector and MixConsole
• Show Routing Rack in MixConsole
• Show Scale Note Guides and Snap Live Input
• Show Select Tool Extra Info and Tool Switch Notification
• Show Selected Channel and Expand Inserts
• Show Selected Channel and Expand Routing in MixConsole
• Show Selected Channels and Expand Routing
• Show Selected Channels and Open Routing
• Show Selected Channels in Mixer
• Show Selected Channels In Mixer
• Show Send Slots in MixConsole
• Show Sends and Routing in Inspector
• Show Time Signature Track
• Show Used Automation Lanes Only
• Show Used Automation on Selected Tracks
• Show Used Channels and Expand Inserts Rack
• Show Used Channels and Reset Meters
• Show Used Channels and Routing Rack
• Show Velocity Lane and Open Logical Editor
• Show Volume and Pan Automation
• Show Volume and Pan Automation
• Show/Hide Automation Lanes
• Show/Hide Chord Pads
• Show/Hide Info View (Info Line)
• Show/Hide Left Zone (Inspector)
• Show/Hide Lower Zone
• Show/Hide Right Zone
• Show/Hide Transport Zone
• ShowHide Automation Lanes
• ShowHide Chord Pads
• ShowHide Info View Info Line
• ShowHide Left Zone Inspector
• ShowHide Lower Zone
• ShowHide Right Zone
• ShowHide Transport Zone
• Snap Event to Cursor then Create Sampler Track
• Snap MIDI Pitches to Scale (Scale Assistant)
• Snap Pitch to Scale in VariAudio
• Snap Point to Cursor Then Create Sampler Track
• Snap to Video Frames
• Snap, Zoom & Event Display Quick Setup
• Snapshot and Full Signal Bypass
• Solo Active Lane
• Solo Center Speaker
• Solo Current Lane for Auditioning
• Solo Front Speakers Then Cancel
• Solo Lane and Select All Events
• Solo LFE Channel
• Solo LFE Speaker then Cancel
• Solo LFE Then Cancel
• Solo, Arm and Record Track
• Spectrum Analyzer and Statistics
• Split at Cursor and Move to Front
• Split at Cursor and Select from Cursor to End
• Split at Locators and Insert Silence
• Split at Loop Range and Insert Silence
• Split Event at Cursor Position
• Split Events at Locators
• Split Notes to Voices and Bounce
• Split Notes to Voices Then Add to Chord Track
• Start Media Preview
• Start Media Preview
• Start Recording at Left Locator
• Stop and Disarm All Audio Tracks
• Stop and Go to Left Locator
• Stop and Go to Previous Marker
• Stop and Go to Project End
• Stop and Jump to Marker 1
• Stop and Jump to Previous Marker
• Stop and Locate Next Marker
• Stop and Return to Last Record Start
• Stop and Return to Start Position
• Stop and Return to Zero
• Stop And Return To Zero
• Stop Media Preview
• Stop Media Preview
• Stop Playback and Enable Listen Mode
• Stop, Cancel Listen, and Return to Zero
• Stop, Dim, and Activate Talkback
• Stop, Disable Cycle, and Return to Zero
• Stop, Disarm All and Cancel Listen
• Stop, Go to Previous Marker and Pre-Roll Play
• Stop, Return to Zero and Disable Cycle
• Stop, Return to Zero and Input Tempo
• Stop, Return to Zero and Loop
• Stop, Return to Zero, and Insert Marker
• Stop, Return to Zero, Open Tempo Track
• Stop, Set Locators to Selection, and Enable Cycle
• Stop, Set Locators to Selection, and Play
• Stop, Set Locators to Selection, and Return to Zero
• Stop, Set Tempo, Return to Zero
• Store Zoom Memory then Zoom Full
• Straighten Pitch in VariAudio
• Stretch Audio to Project Tempo then Create Sampler Track
• Stretch to Project Tempo and Bounce
• Strings — Convert to Note Expression and Trim
• Strings — Legato, Remove Overlaps and Bounce
• Strip Silence from Audio
• Suspend All Automation Reading and Show Used Lanes
• Suspend All Automation Reading and Writing
• Suspend All Read/Write + Switch to Touch Mode
• Suspend Automation Reading and Hide
• Suspend Automation Writing and Enable Read
• Switch Off and Hide Empty or Short MIDI Tracks
• Switch to Main Speaker Set 1
• Switch to Mixing View
• Switch to Next Track Version
• Switch To Next Track Version
• Switch to Page View and Fill Screen
• Switch to Page View and Open Layout Settings
• Switch to Page View with Bar Numbers
• Switch to Previous Track Version
• Switch To Previous Track Version
• Switch to Speaker Set 1
• Switch to Speaker Set 2
• Switch to Speaker Set 2 (A/B Compare)
• Switch to Tracking View
• Sync Project and Mixer Track Visibility
• Sync Project And Mixer Track Visibility
• Sync Project Window and MixConsole Selection
• Sync Punch Points to Cycle and Record
• Sync Punch Points to Cycle Range
• Sync Punch to Cycle and Enable Pre-count
• Sync Selected Track Visibility to MixConsole
• Sync Selected Tracks to Mixer Visibility
• Sync Selection Between Project Window and MixConsole
• Sync Visibility Then Show Selected in Mixer
• Synth — Freeze/Unfreeze with Current Settings
• Synth — Full MIDI Clean and Bounce
• Talkback with Monitor Dim
• Talkback with Studio 1 Cue Active
• Tap Tempo
• Tap Tempo Then Open Tempo Track
• Tap Tempo with Precount Enabled
• Tap Tempo, Enable Cycle and Record
• Tap Tempo, Enable Precount, and Play
• Tempo Detection with Rehearsal Mode Toggle
• Thin MIDI Data
• Thin Out Controllers then Show Velocity Lane
• Thin Out Controllers, Quantize and Bounce
• Time Stretch Audio Event
• Toggle AFL/PFL and Open Control Room
• Toggle AFL/PFL and Reset Meters
• Toggle AFL/PFL Solo Mode
• Toggle Auto Quantize
• Toggle Auto Quantize
• Toggle Click in Control Room
• Toggle Click In Control Room
• Toggle Concert Pitch
• Toggle Concert Pitch and Fill View
• Toggle Concert Pitch and Open Layout Settings
• Toggle Control Room Click
• Toggle Cycle Follows When Locating to Markers
• Toggle Cycle Mode
• Toggle Dim
• Toggle Dim
• Toggle Direct Routing Summing Mode and Expand View
• Toggle EQ Bypass on Selected Tracks then Reset Meters
• Toggle EQ Section in Inspector
• Toggle EQ Section In Inspector
• Toggle Event Names and Waveforms
• Toggle Fold on Selected Track
• Toggle Freeze on Selected Tracks
• Toggle Full Screen Mode
• Toggle Group Tracks Visibility
• Toggle Horizontal & Vertical Crosshair Cursor Lines
• Toggle Insert Bypass then Open Insert 1 Editor
• Toggle Inserts Section in Inspector
• Toggle Inserts Section In Inspector
• Toggle Lane Display and Zoom to Selection
• Toggle Metronome (Click) On/Off
• Toggle Metronome Click
• Toggle Metronome Click OnOff
• Toggle Monitor Click
• Toggle Q Link Quick Link
• Toggle Q-Link (Quick Link)
• Toggle Quick Controls and Notepad in Inspector
• Toggle Reference Level
• Toggle Reference Level in Control Room
• Toggle Routing Section in Inspector
• Toggle Routing Section In Inspector
• Toggle Sends Section in Inspector
• Toggle Sends Section In Inspector
• Toggle Snap to Grid
• Toggle Strip and Channel Sections in Inspector
• Toggle Talkback
• Toggle Talkback
• Toggle Tempo Rehearsal Mode and Enable Metronome
• Toggle Tempo Track Rehearsal Mode
• Toggle Toolbox on Right-Click
• Toggle Triplet Quantize
• Toggle Triplet Quantize
• Touch Mode + Enable Read on All Tracks
• Transpose Chord Pad Down and Fewer Tensions
• Transpose Chord Pad Up and Next Voicing
• Transpose Chord Pad Up and Record
• Transpose Down and Match Chord Track
• Transpose Down One Semitone
• Transpose MIDI Down One Octave
• Transpose MIDI Down One Semitone
• Transpose MIDI Up One Octave
• Transpose MIDI Up One Semitone
• Transpose Notes then Quantize
• Transpose Up and Match Chord Track
• Transpose Up One Semitone
• Transpose Up, Match Chord Track, and Bounce
• Transpose, Fix Mono Overlaps & Freeze Quantize
• Trim Mode + Freeze All Trim Automation
• Trim Mode + Freeze Trim on Selected Tracks
• Undo MixConsole Change
• Undo MixConsole Step
• Undo Quantize and Reset MIDI
• Undo Quantize on MIDI
• Undo Quantize on Selected MIDI
• Undo Quantize then Iterative Quantize
• Undo Zoom and Return Cursor to Start
• Unfold All Tracks
• Unfold All Tracks
• Unfreeze Selected Track
• Unfreeze Selected Tracks
• Ungroup Selected Events
• Unlink Channels and Disable Q-Link
• Unlink Channels and Reveal All
• Unlink Selected Channels
• Unlink Selected MixConsole Channels
• Unlock Selected Events
• Unmute All Events Across Lanes
• Unmute All Events After Comp
• Unmute All Tracks
• Unmute All Tracks
• Unmute All, Show Automation Overview and Zoom Full
• Unmute Events Then Create Sampler Track
• Unmute Events, Remove Fades, and Close Gaps
• Unstretch Audio and Bounce
• Update Current Workspace
• Update Current Workspace
• Use Virgin Territories + Fill Loop + Show All Used Automation
• VariAudio Bypass Pitching
• VariAudio Extract MIDI No Dialog
• VariAudio Quantize Pitch
• VariAudio Reanalizar
• VariAudio Reanalyze
• VariAudio Reset Pitch And Warp Changes
• VariAudio Reset Pitch Changes
• VariAudio: Extract MIDI (no Dialog)
• VariAudio: Reset Pitch and Warp Changes
• VariAudio: Reset Pitch Changes
• Vocals — Pitch Correct and Bounce
• Vocals — Remove Fades, Close Gaps and Bounce
• Vocals — Reset All VariAudio Changes
• Vocals — VariAudio Reanalyze and Extract MIDI
• Vocals — VariAudio Reanalyze and Quantize Pitch
• ZAP Zoom to Event and Play
• Zoom 4 Tracks and Fit to Locators
• Zoom 4 Tracks and Select All
• Zoom 4 Tracks and Zoom to Event
• Zoom 8 Tracks and Zoom Full Horizontally
• Zoom 8 Tracks Full Horizontal
• Zoom Full (Show Entire Project)
• Zoom Full and Return to Zero
• Zoom Full and Select All Events
• Zoom Full Show Entire Project
• Zoom Full Then Undo Zoom
• Zoom In Horizontally
• Zoom In on Waveform Vertically
• Zoom In on Waveform Vertically (Double Step)
• Zoom In Vertically (Taller Tracks)
• Zoom Out Horizontally
• Zoom Out Tracks and Full Project Overview
• Zoom Out Vertically (Shorter Tracks)
• Zoom Selected Track Exclusively
• Zoom to Cycle Marker 1 and Play
• Zoom to Event and Loop Play
• Zoom to Event and Play from Selection
• Zoom to Locators and Loop Play
• Zoom to Locators and Stop
• Zoom to Locators with 8 Tracks and Autoscroll
• Zoom To Selection
• Zoom to Selection and Open Lower Zone
• Zoom to Selection and Play
• Zoom to Selection and Set Locators
• Zoom to Selection and Set Loop
• Zoom to Selection, Split, Restore Zoom
• Zoom Tool: Horizontal Zoom Only
• Zoom Tracks Full Height and Zoom In Vertically
• Zoom Tracks to 4 Rows
• Zoom ZAP and Redo Zoom